Non Rotating Bottom Cementing Plug

1. Sizes ranging from 4-1/2" to 20"
2. PDC Drillable Plugs
3. Aluminum/Phenolic core inside
4. Up to 200 degree Fahrenheit or more
5. Decrease drill out time

Send Inquiry

Description

Technical Parameters

Products Description

Non Rotating bottom cementing plugs have been designed to decrease drill out time.
Non-Rotating cementing plugs have reinforced locking teeth built into the plugs.
The cementing plugs lock together between the top plug and the bottom plug to eliminate rotation of the plug during drill out.
These cementing plugs are made of Natural Rubber with aluminum alloy or Phenolic core inside.
Operating rage of temperature with Hydrogenated Nitrile core is up to 200 degree Fahrenheit.
The bottom plug in orange with rupture diaphragm at 300 psi differential.
These cementing plugs are completely PDC drillable.
API cementing plug can be ordered for higher operating temperature and operation in either synthetic or mud fluids.
Available in 4-1/2" to 20" and other special sizes.
Any special sizes are available on request.

Non Rotating Cementing Plug Specification

Casing Size	Casing Specification		O.D of Rubber Cup
in.	kg/m	lb/ft	mm	in.
4-1/2	14.14-17.26	9.50-11.60	110	4.331
5	17.11-35.86	11.50-24.10	122	4.803
5-1/2	20.83-39.88	14.00-26.80	135	5.315
7	25.30-56.55	17.00-38.00	170	6.693
7-5/8	35.72-63.69	24.00-42.80	185	7.283
9-5/8	53.57-79.62	36.00-53.50	235	9.252
10-3/4	60.27-97.77	40.50-65.70	260	10.236
13-3/8	71.43-107.15	48.00-72.00	333	13.110
20	139.89-197.93	94.00-133.00	498	19.606