What Are The Conditions For The Construction Environment Of Activity Rooms?

Everyone is familiar with activity rooms, so do you know what conditions activity rooms have for the construction environment? Below is a detailed introduction for everyone:
For activity rooms, everyone is familiar with them. In some construction sites and factories, you can see simple activity rooms that can be moved. Although they are light in weight, they have good organization and seismic resistance. The rooms can be disassembled and reassembled in multiple ways, and the utilization rate is high. It should be noted that there are certain requirements for the assembly location and environment in the color steel container room. Hardness of foundation: Before pouring the foundation, it is necessary to measure the hardness of the foundation beforehand. If there are special terrain or the hardness of the foundation is too high, special treatment must be taken.

Single story activity board house consumer manufacturer, to ensure the smooth assembly and quality of the board house after assembly, how to handle special issues, and communicate with the technical department. The level of the foundation: When pouring the foundation, it is necessary to measure the optimal level. For the Shijingshan color steel room, after the foundation is poured, the level error is controlled within 10mm. Concrete grade: The bottom of most scale slab houses is C20. Under normal conditions, there is no steel reinforcement inside.

If there are special terrain, foundation conditions, or special requests for prefabricated houses, the drawings shall prevail. Bottom pouring time: The bottom pouring of the grid house should follow the conventional concrete pouring process and cannot reduce the process sequence. There should be sufficient time left between the completion of the foundation pouring and the installation of the board room to ensure that the concrete reaches the required hardness. To ensure the assembly schedule, assembly quality, and cleanliness and aesthetics after assembly.

At the same time as manufacturing the foundation, the indoor air is also poured together, with the same horizontal height as the foundation. After the assembly of the rural color steel room, it is convenient to lay the floor indoors. The Nanzhao color steel room is clean and tidy, and it will not affect the quality and appearance of the board room. The height of the indoor floor should be more than 50mm higher than the basic level, and rainwater will not flow into the soft level of the indoor and ground ring beams. As long as the request for assembly location and environment is received.